简体中文
Русский

Mark V

  • Overview
  • Features
  • Accessories
  • Price List
  • Manuals
  • SpecSheets

The dual frequency DigiTrak® Mark V utilizes the industry's lowest frequency for optimum rebar penetration. Advanced circuit design effectively combats active interference and increases pitch/roll speed and range.

Mark V Locator Features
  • Dual-frequency receiver and transmitter.
  • Effective interference rejection.
  • Look-ahead™ locating provides location, depth, pitch, and roll of the transmitter in drill head, in addition to transmitter battery and temperature status.
  • Easy-to-learn target-in-the-box® locating technique leads you to the transmitter or locate point.
  • Enhanced locating features are built upon an accurate, proven design.
  • Smooth auto-gain changes are transparent to the operator.
  • Display shows real-time movement of the transmitter to allow "on-the-fly" locating.
  • Patented calibration procedure offers superb accuracy and the ability to recalibrate while drilling.
  • Remote left/right steering capability.

Mark V Locating System Specifications
Model Number DRRV
Frequency 1.5 / 33 kHz
Power Source DigiTrak NiCad battery pack
Battery Life 8—12 hrs (approx.)
Battery Charger 12/28 V DC or 110/220 V AC
Depth Range up to 145 ft (42.7m)
depending on transmitter used.
Depth Display Real time
Functions Menu Driven
Graphic Display LCD
Audio Output Beeper
Telemetry Range 2000 ft (610 m)
Operating Temp Range - 4° F to 140° F/-20° C to 60° C
Data Update Rate
Roll Position 12 times/second
Pitch Value Once/second
Accuracy ± 5% absolute, depending on transmitter used

Dimensions
Height 11 in (27.9 cm)
Width 5 in (12.7 cm)
Length 13.5 in. (34.3 cm)
Weight (w/battery) 8.7 lb (3.9 kg)

Mark V Remote Systems

Remote Display

The Remote Display lets you see drilling information at the drill.

Remote Packages

Our remote packages combine all the parts needed to track with our MarkV receiver remotely. See the Price List for configurations and more information.
MFD

MFD Remote

The MFD can accept telemetry signals from 4* different DCI manufactured receivers: F2™, Eclipse®, Mark III, and Mark V. The MFD unit can also be used with the Eclipse® TensiTrak® Pullback and Pressure Monitoring system.
* to receive telemetry signal from the F2™ requires update to Gen1 to Gen 2.

Mark V Transmitters

Transmitters

Transmitters There are a variety of transmitters available for use with our Mark series locators including battery and cable units and our new DucTrak series. Go to the transmitters page for more information.

Mark V Parts

DataLog

The DataLog module records drilling data with a single button.

Adapter

The DataLog interface allows you to download DataLog information to your PC.

Battery Charger

The DigiTrak Battery Charger re-charges your NiCad batteries with a quick charge feature.

Mark V Systems
Part # System MSRP *
SYSREM5 System without Remote Display
Includes a Receiver, Battery Charger, Battery Charger Power Kit, 2 Battery Packs, System Carry Case		 $10,600
SYSREMDD5 System with Remote Display
Includes a Receiver, Remote Display, Battery Charger, Battery Charger Power Kit, 3 Battery Packs, System Carry Case, Manual		 $13,700
SYSREMDD5-DL System with DataLog
Includes a Receiver, Remote Display, DataLog Module, DataLog/PC Interface Set, Battery Charger, Battery Charger Power Kit, 3 Battery Packs, System Carry Case, Manual		 $16,700

Mark V Components
Part # Component MSRP *
DRRV Mark V Receiver $9,700
DDV Mark V Remote Display $3,200
DBC NiCad Battery Charger w/Power Kit
 $525
DBP NiCad Battery Pack
 $125
LCC MK/LT System Carrying Case - Gray
 $400
MK5CD-MAN Digitrak® MKV CD ROM Manual - Several Languages
 N/C

DataLog® Components
Part # Component MSRP *
DLM DataLog® Snap-On Module
(Requires DLI)		 $1,500
DLI KIT DataLog® Software with PC Interface
(Requires DLM)		 $1,500
DLC DataLog® Real Time Cable
(replacement)
$75

 

TERMS AND CONDITIONS:

NOTE: Receivers and Displays are licensed for use in the USA/Canada, United Kingdom, China, Switzerland, Netherlands, and Australia. Specify Country (e.g. US, UK, CH, SW, AU, NL) when ordering any of the Remote Systems, Remote Parts, or Remote Upgrades.
All prices are $US, FOB Kent, WA, USA.
Prices on systems, components & accessories are subject to change without notice and subject to availability.
DigiTrak® Systems and all related components are designed and built in the USA.
DigiTrak® products are covered by various US patents and the DCI logo, DigiTrak®, Eclipse®, DataLog®, iGPS®, TensiTrak®, SST®, CableLink®, MFD® are registered trademarks of Digital Control Inc.
Prices are Net 30
* MSRP's are manufacturer's suggested retail prices only. Actual prices may vary. MSRP does not include foreign taxes or duties.

Mark V Owners Manual
Mark V English French
German Spanish
Italian Dutch
Danish Brazillian Portuguese
Traditional Chinese Simplified Chinese
Russian  
   

DataLog® Owners Manual
Datalog® English
   
   
   
   
   
   

MFD® Owners Manual
MFD® English German
Russian Hindi
   
   
   
   
   

Mark V Spec Sheets
Mark V English French
German Spanish
Italian Dutch
Danish Brazillian Portuguese
Simplified Chinese Traditional Chinese
Polish Czech
Russian Hindi

MFD® Spec Sheets
MFD® English German
Russian Hindi
   
   
   
   
   

Cable System Requirements
CableTx English German
Russian Hindi
   
   
   
   
   

Cable Transmitter End Cap Repair
MFD® English German
Italian Danish
Russian Hindi
   
   
   
   

Transmitter Spec Sheets
Mark III Transmitters Please go to the Transmitters Specs Sheets Page and click on Specsheets Menu item on that page to locate the spec sheet you require..  
   
   
   
   

<< back to home page
 
Digital Control Incorporated
SSL Certificates